What Our Clients Say about us..
who we are
USA Epoxy Floors provides concrete coating installation and protection for residential, commercial, and industrial properties throughout the region. George Tsinias, owner, performs slab assessment, recommends preparation, and oversees every project—from initial diagnosis to final inspection. Locally owned, family-operated, and veteran-owned, the company uses technical surface preparation and material selection to match system performance to each building’s requirements. Coating options include solid color, flake, quartz, and decorative effects, with all installation steps handled in-house to ensure consistent quality and reliable results. Over 25 years of experience goes into every floor, from moisture testing to the final protective layer.
Why Dutchess COUNTY property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
USA EPOXY FLOORS
Concrete Coating in Dutchess County, NY
USA Epoxy Floors provides concrete coating installation, covering residential, commercial, and industrial floors. Floors are cleaned, mechanically profiled, and moisture is tested before any coating system is applied. The finished floor gains chemical resistance, abrasion durability, and a renewed appearance.
Why Choose Us
Evaluation begins with a slab assessment to determine the existing concrete condition, including hardness, contaminants, and moisture content. George Tsinias, owner of USA Epoxy Floors, tests for vapor emissions and checks for previous coatings or repairs that might affect bond. / Concrete is prepared using the right method for the chosen coating. Diamond grinding or shot blasting creates the surface profile the system needs, followed by vacuuming and, if necessary, patching cracks or joints with repair compounds. Primer is applied, then one or more coats of epoxy, polyaspartic, or urethane depending on system requirements. Broadcast aggregates, flakes, or pigments may be added for appearance or slip-resistance. / The final floor is inspected for coverage, finish, and adhesion. The result is a concrete surface protected against wear, chemicals, and moisture, with finish options ranging from solid color, decorative flake, quartz, or high-gloss metallic. Proper installation extends floor life and reduces maintenance.
Correct Surface Profile for Strong Bond
Concrete coating only performs as intended when the substrate is profiled to meet system requirements. USA Epoxy Floors uses diamond grinding or shot blasting to achieve the manufacturer’s recommended CSP (Concrete Surface Profile), typically CSP 2-4 for most coating systems. This ensures reliable adhesion and reduces the risk of peeling.
Moisture Testing Avoids Costly Failures
Before any coating installation, George tests the concrete for excessive moisture using a calcium chloride kit or electronic meter. If vapor emission is above safe levels, a moisture mitigation system is specified. This step prevents failures like bubbling, whitening, or delamination from unseen moisture migration inside the slab.
System Selection Matched to Environment
USA Epoxy Floors selects coating chemistries and build sequences based on the demands of the actual space: environmental factors, chemical exposure, traffic, and required slip resistance. Epoxy, polyaspartic, and urethane are used according to where the durability, cure time, or specific resistance is most beneficial for the client.
get StARTED
Fill In your information below
Frequently Asked Questions
Do you offer Concrete Coating in Dutchess?
Yes. USA Epoxy Floors handles Concrete Coating throughout Dutchess and the surrounding Dutchess County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
What is involved in Concrete Coating?
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
How long does Concrete Coating take in Dutchess?
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Is my floor a candidate for Concrete Coating?
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
What kind of preparation does the concrete need?
Mechanical profiling — diamond grinding or shot blasting — so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
How do I schedule Concrete Coating in Dutchess?
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Dutchess, and is on site during the work.
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Concrete Floor Coating
USA Epoxy Floors provides concrete floor coating for residential, commercial, and industrial spaces. Every project starts with a thorough slab assessment and mechanical preparation like diamond grinding or shot blasting. The finished result is a seamless, durable resinous surface matched to the environment and use.
Concrete Floor Leveling
Concrete floor leveling from USA Epoxy Floors corrects uneven, sloped, or rough concrete slabs to create a flat, even surface. The process involves mechanical grinding, filling low spots with specialized leveling compounds, and verifying the final plane with precision tools. Customers receive a substrate ready for new flooring, coatings, or use as polished or stained concrete.
Epoxy Floor Resurfacing
Epoxy floor resurfacing involves preparing worn or damaged epoxy and applying a new resinous system over it. The process includes mechanical abrasion, removal of loose material, and bonding a new coating to the cleaned surface. The result is a renewed, seamless floor that restores appearance and performance without full removal.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.