USA EPOXY FLOORS
Floor Refinishing in Ho-Ho-Kus, NJ
USA Epoxy Floors provides floor refinishing in Ho-Ho-Kus, handling grinding, repairs, and removal of worn coatings. Worn-out or damaged floors are restored to a clean, ready base for new finishes or coatings. The outcome is a stable, repair-ready surface.
Why Choose Us
In Ho-Ho-Kus, floor refinishing by USA Epoxy Floors starts with a site assessment, including moisture testing and slab inspection, to determine the level of needed surface correction. This identifies underlying issues affecting new coatings or finishes up front. / The mechanical process involves stripping any existing failed coatings, removing stains and contaminants, and using diamond grinding or shot blasting for the required profile. Concrete cracks, spalls, and joint damage are treated using repair compounds. The entire area is left clean and vacuumed, ready for flooring installation or as a finished slab in its own right. / After surface preparation and repair, USA Epoxy Floors applies a new resinous coating, stain, or polish as specified, or hands the base to the next trade as a finished substrate. George Tsinias confirms that all preparation and installation steps are complete, and the property receives a renewed, functional surface.
Mechanical Surface Prep for Lasting Results
USA Epoxy Floors grinds and profiles floors in Ho-Ho-Kus using industrial diamond tools. This removes failing coatings and glues, and restores the correct concrete profile required for resinous or polished systems. The process provides durable adhesion and a clean finish, ready for a new flooring system.
Site-Specific Floor Evaluation
George assesses floors in Ho-Ho-Kus for problems below the surface: moisture trapped in slabs, prior coating compatibility, patch failure, and contamination. His diagnosis guides the right grinding, repair, or replacement strategy, so the refinished area performs correctly and avoids repeat problems found in older Bergen County properties.
Single Point Accountability Throughout Ho-Ho-Kus
Every Ho-Ho-Kus floor refinishing is directly managed by George, not handed off to a separate crew. This gives Ho-Ho-Kus property owners direct answers at every step, from slab assessment and removal to final prep and completion, with no break in responsibility. George signs off on every job in Ho-Ho-Kus.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Bergen County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Do you offer Floor Refinishing in Ho-Ho-Kus?
Yes. USA Epoxy Floors handles Floor Refinishing throughout Ho-Ho-Kus and the surrounding Bergen County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
What is involved in Floor Refinishing?
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
How long does Floor Refinishing take in Ho-Ho-Kus?
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Is my floor a candidate for Floor Refinishing?
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
What kind of preparation does the concrete need?
Mechanical profiling — diamond grinding or shot blasting — so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
How do I schedule Floor Refinishing in Ho-Ho-Kus?
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Ho-Ho-Kus, and is on site during the work.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor finishing
USA Epoxy Floors provides floor finishing in Ho-Ho-Kus, beginning with in-depth substrate cleaning, repairing visible flaws, and applying a high-quality topcoat or sealer. This process renews and protects residential, commercial, and industrial spaces in Ho-Ho-Kus with a consistent, tailored finish.
Concrete Resurfacing
USA Epoxy Floors rebuilds deteriorated concrete surfaces in Ho-Ho-Kus with full resurfacing—starting with detailed slab prep including grinding or blasting, followed by comprehensive repair. The renewed surface is left smooth and structurally ready for coatings, stain, polish, or direct use.
Concrete Polishing
Concrete polishing by USA Epoxy Floors takes untreated Ho-Ho-Kus slabs and transforms them through multiple diamond grinding steps. Underlying cracks and surface faults are addressed before any finishing begins. The completed surface in Ho-Ho-Kus offers easy cleaning, high wear resistance, and a tailored sheen.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
