USA EPOXY FLOORS
Flake Epoxy Floor Installation in Wallington, NJ
In Wallington, USA Epoxy Floors installs flake epoxy floors by broadcasting colored vinyl flakes into a wet epoxy layer over CSP-3-ground concrete, then sealing with a high-build clear topcoat. Each installation uses moisture-checked slabs and fits the needs of businesses and homes in Wallington.
Why Choose Us
In Wallington, every flake epoxy floor begins with George Tsinias personally evaluating the slab for contaminants, joint issues, and vapor emission. In typical Wallington garages, moisture readings often drive the choice of primer for total bond security. Diamond grinding achieves a CSP-3 surface, clearing away the old surface and preparing for the new system. / Following preparation, an epoxy base coat is applied and vinyl flakes are distributed across the wet surface using either a full-broadcast or targeted accent style, based on client requests. Once the epoxy has set, all loose flakes are scraped off, then the floor is vacuumed for a clean texture. A commercial-grade polyaspartic or urethane topcoat is applied to lock in durability and color. / George concludes by inspecting every section for consistency, adhesion, and finish. These installs in Wallington are designed for garage use, shops, busy industrial areas, and decorative interiors, grounding style in real slip resistance and commercial wear tolerance.
Diamond Profile Prepares Wallington Slabs for Epoxy
USA Epoxy Floors grinds all Wallington concrete with diamond tooling to target CSP-3 before any flake epoxy goes down. This surface profile is what allows the basecoat and flake broadcast to adhere fully, eliminating the peeling, bubbling, or edge lift frequently seen when floors are acid etched or prepped with just detergent.
Moisture Control for Wallington Slab Conditions
Every Wallington installation includes precise slab moisture readings using digital meters. Where emission rates are high, George applies specialized primers to prevent vapor-driven separation or bubbling. This ensures flake floors last in Wallington's basements, garages, or on-grade retail sites without early breakdown or visual defects.
Flake Blend and Finish Options Tailored for Wallington
USA Epoxy Floors works directly with Wallington clients to pick custom flake blends, color groupings, and topcoat finishes—ranging from matte to full gloss and varying slip resistance. Broadcast technique and coat thickness are matched to how the space will be used, supporting everything from showrooms to working warehouses.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Bergen County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Does USA Epoxy Floors handle Flake Epoxy Floor Installation near Wallington?
Yes. Flake Epoxy Floor Installation is part of the regular service range across Wallington and Bergen County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
How durable is the result of Flake Epoxy Floor Installation?
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
What happens if moisture is coming through the slab?
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
Do I need to move everything out first?
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
What finishes are available with Flake Epoxy Floor Installation?
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
Who handles the job?
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Wallington.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Metallic Epoxy Floor Installation
Metallic epoxy floor installation by USA Epoxy Floors creates custom, high-gloss floors built with diamond-ground preparation and specialized patterned metallic pigment layers. Customers receive a one-of-a-kind floor, professionally protected with a commercial-grade topcoat.
Polyaspartic Floor Installation
Polyaspartic floor installation in Wallington uses rapid-curing resins for environments needing minimal downtime and high durability. The process involves detailed surface prep and moisture testing before primer and system coats. Finished floors are back in service within hours.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
