USA EPOXY FLOORS
Flake Epoxy Floor Installation in Bloomingdale, NJ
In Bloomingdale, USA Epoxy Floors installs flake epoxy floors by broadcasting colored vinyl flakes into a wet epoxy layer over CSP-3-ground concrete, then sealing with a high-build clear topcoat. Each installation uses moisture-checked slabs and fits the needs of businesses and homes in Bloomingdale.
Why Choose Us
In Bloomingdale, every flake epoxy floor begins with George Tsinias personally evaluating the slab for contaminants, joint issues, and vapor emission. In typical Bloomingdale garages, moisture readings often drive the choice of primer for total bond security. Diamond grinding achieves a CSP-3 surface, clearing away the old surface and preparing for the new system. / Following preparation, an epoxy base coat is applied and vinyl flakes are distributed across the wet surface using either a full-broadcast or targeted accent style, based on client requests. Once the epoxy has set, all loose flakes are scraped off, then the floor is vacuumed for a clean texture. A commercial-grade polyaspartic or urethane topcoat is applied to lock in durability and color. / George concludes by inspecting every section for consistency, adhesion, and finish. These installs in Bloomingdale are designed for garage use, shops, busy industrial areas, and decorative interiors, grounding style in real slip resistance and commercial wear tolerance.
Diamond Profile Prepares Bloomingdale Slabs for Epoxy
USA Epoxy Floors grinds all Bloomingdale concrete with diamond tooling to target CSP-3 before any flake epoxy goes down. This surface profile is what allows the basecoat and flake broadcast to adhere fully, eliminating the peeling, bubbling, or edge lift frequently seen when floors are acid etched or prepped with just detergent.
Moisture Control for Bloomingdale Slab Conditions
Every Bloomingdale installation includes precise slab moisture readings using digital meters. Where emission rates are high, George applies specialized primers to prevent vapor-driven separation or bubbling. This ensures flake floors last in Bloomingdale's basements, garages, or on-grade retail sites without early breakdown or visual defects.
Flake Blend and Finish Options Tailored for Bloomingdale
USA Epoxy Floors works directly with Bloomingdale clients to pick custom flake blends, color groupings, and topcoat finishes—ranging from matte to full gloss and varying slip resistance. Broadcast technique and coat thickness are matched to how the space will be used, supporting everything from showrooms to working warehouses.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Passaic County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Do you offer Flake Epoxy Floor Installation in Bloomingdale?
Yes. USA Epoxy Floors handles Flake Epoxy Floor Installation throughout Bloomingdale and the surrounding Passaic County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
What is involved in Flake Epoxy Floor Installation?
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
How long does Flake Epoxy Floor Installation take in Bloomingdale?
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Is my floor a candidate for Flake Epoxy Floor Installation?
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
What kind of preparation does the concrete need?
Mechanical profiling — diamond grinding or shot blasting — so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
How do I schedule Flake Epoxy Floor Installation in Bloomingdale?
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Bloomingdale, and is on site during the work.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Metallic Epoxy Floor Installation
Metallic epoxy floor installation by USA Epoxy Floors creates custom, high-gloss floors built with diamond-ground preparation and specialized patterned metallic pigment layers. Customers receive a one-of-a-kind floor, professionally protected with a commercial-grade topcoat.
Polyaspartic Floor Installation
Polyaspartic floor installation in Bloomingdale features rapid-cure resin systems that support demanding commercial or industrial use with minimal downtime. George evaluates and preps the slab for adhesion and applies multiple coats in a single work window. Resulting floors in Bloomingdale are traffic-ready within hours, offering both durability and custom finish.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
