USA EPOXY FLOORS
Flake Epoxy Floor Installation in Andover, NJ
Flake epoxy floor installation in Andover builds a multi-layer system with decorative vinyl flakes broadcast into an epoxy base and sealed with a clear topcoat. Each floor is moisture tested, diamond ground, and custom designed for commercial, industrial, or residential use in Andover.
Why Choose Us
Every flake epoxy floor project in Andover by USA Epoxy Floors starts by inspecting and moisture testing the existing concrete. In many Andover basements and garages, slab moisture or old repairs are a factor. Concrete is always diamond ground to CSP-3 before installation starts, ensuring bond and proper flake embedment. / Flake installation proceeds with a tinted epoxy base coat, then full or partial broadcast of the selected flake blend. Flakes are distributed for full coverage or accent, depending on the client’s choice. After cure, the excess is scraped and removed, and a chemical-resistant clear topcoat—usually polyaspartic or urethane—is rolled or squeegeed to lock in the broadcast and deliver a seamless finish. / Upon completion, George Tsinias inspects the floor with the client, checking flake coverage, adhesion, and finish quality. The process delivers a customizable, slip-resistant, and decorative floor for Andover properties, ready for traffic, cleaning, and regular use.
Full Mechanical Grinding for Andover Concrete
For every flake epoxy floor in Andover, USA Epoxy Floors uses diamond grinding to reach a CSP-3 profile. This technical preparation ensures the new system bonds to the slab, eliminating the risk of coating failure or hot tire pickup seen in garages where acid etch or no prep is done.
Moisture Mitigation Where Andover Needs It
High moisture readings are common in Andover garages and basements. George tests every slab before installing flake epoxy. When needed, a dedicated vapor-control primer is applied to prevent future bubbles, blistering, or bond loss, safeguarding the investment in high-traffic areas.
Custom Flake Color and Texture in Andover
Flake epoxy floors installed by USA Epoxy Floors in Andover include a wide selection of flake blends, texture profiles, and finish options. Full broadcast, partial, or accent designs are matched to each space. Slip-resistant and chemical-resistant topcoats offer lasting appearance and commercial-grade durability.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Sussex County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Do you offer Flake Epoxy Floor Installation in Andover?
Yes. USA Epoxy Floors handles Flake Epoxy Floor Installation throughout Andover and the surrounding Sussex County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
What is involved in Flake Epoxy Floor Installation?
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
How long does Flake Epoxy Floor Installation take in Andover?
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Is my floor a candidate for Flake Epoxy Floor Installation?
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
What kind of preparation does the concrete need?
Mechanical profiling — diamond grinding or shot blasting — so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
How do I schedule Flake Epoxy Floor Installation in Andover?
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Andover, and is on site during the work.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Metallic Epoxy Floor Installation
In Andover, USA Epoxy Floors installs metallic epoxy systems that combine diamond-ground concrete with in-place pigment manipulation for distinct, high-gloss floors. Every project gets a custom base, layered metallic effects, and a professionally applied topcoat for lasting protection and showpiece visuals.
Polyaspartic Floor Installation
In Andover, polyaspartic floor installation provides a rapid-cure resin system ideal for facilities needing quick service and strong durability. After focused surface prep and moisture check, primer and polyaspartic coats are applied. Areas can be ready to use in a matter of hours, with a uniform, hard-wearing finish.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
