USA EPOXY FLOORS
Epoxy Floor Resurfacing in Cherry Ridge, PA
Epoxy floor resurfacing from USA Epoxy Floors renews older or damaged coatings through grinding, repairs, and a new resinous system. Preparation targets adhesion, not full removal. The finished floor regains a seamless, clean appearance with restored durability.
Why Choose Us
Every epoxy floor resurfacing project in Cherry Ridge starts with a close assessment of the existing coating: George Tsinias, owner of USA Epoxy Floors, checks for delamination, peeling, cracks, and moisture conditions unique to Cherry Ridge construction. Surfaces are moisture-tested, adhesion is screened, and any irreparable damage is identified. Using diamond grinders, all loose or failed coating is removed and the entire floor is mechanically prepared to the right CSP for the new system. Edges, joints, and cracks in Cherry Ridge floors are patched and leveled to provide a stable base.
/
After repair and preparation, a new resinous system is installed. This includes a primer for bonding, base coat, broadcast or pigment if needed, and a protective topcoat suited for the specific use case in Cherry Ridge—garage, shop, commercial, or industrial. Slip-resistant finishes, decorative flakes, or chemical resistance can be integrated. Each layer is applied inside its recoat window, ensuring proper bond and long-term stability.
/
George personally inspects the finished resurfaced floor for coverage, film build, and defect correction. The updated floor in Cherry Ridge delivers renewed looks and performance—restoring what works without the downtime and cost of total floor replacement.

Resurfacing System Chosen for Cherry Ridge Floor Demands
Resurfacing in Cherry Ridge uses resinous systems tailored for the environment—industrial-grade for factories, chemical-resistant for shops, or decorative for garages. George guides the specification and finishing process so every resurfaced floor is matched to its real-world use.

Renew Worn Epoxy in Cherry Ridge Without Full Removal
USA Epoxy Floors provides epoxy floor resurfacing across Cherry Ridge for floors that need restoration but do not require complete demolition. George evaluates each slab, mechanically removes loose or failing material, and applies a new coating system for renewed durability—all with minimal disruption.

Eliminates Peeling, Hot Tire Pickup, and Cosmetic Failures
In Cherry Ridge, resurfacing is the answer for floors with peeling retail kits, delaminated coatings, or wear from heavy use. Every failed layer is stripped by grinding before new materials are installed. The finished floor solves visible failures while correcting what caused them underneath.


get StARTED
Fill In your information below

who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Wayne County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓




ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Is Epoxy Floor Resurfacing available in Cherry Ridge?
Yes — Cherry Ridge and communities across Wayne County, PA. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
What should I expect during Epoxy Floor Resurfacing?
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Will Epoxy Floor Resurfacing work on a floor that already has a coating?
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
What system will be used for Epoxy Floor Resurfacing?
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Can Epoxy Floor Resurfacing be done in winter in Cherry Ridge?
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Cherry Ridge spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
How do I get a price for Epoxy Floor Resurfacing?
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Cherry Ridge, walks the floor, and quotes on the spot.

What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
.png)
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
.png)
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
.png)
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
.png)


get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Flake Epoxy Floor Installation
Flake epoxy floor installation by USA Epoxy Floors in Cherry Ridge combines custom flake blends in a resinous base, sealed under a chemical-resistant topcoat. Each slab in Cherry Ridge is checked for moisture, ground to CSP-3, and then detailed with the client’s design and use needs in mind.

Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.





























