USA EPOXY FLOORS
Epoxy Floor Recoating in Windsor, CT
USA Epoxy Floors restores worn resin floors in Windsor by inspecting the existing surface, correcting defects, and mechanically abrading before applying a new resin layer. Each recoat is chosen for compatibility, leading to a uniform, reinforced finish that outlasts basic overcoats.
Why Choose Us
Recoating in Windsor starts with a floor inspection for bond issues, moisture conditions typical in Hartford County, and evidence of prior coating damage or wear. George Tsinias assesses whether surfaces qualify for recoat or need more intensive restoration, checking chemical compatibility throughout. / Using diamond grinding or abrasive screening, USA Epoxy Floors brings the profile to what the next system requires—normally CSP-2 or CSP-3 for most recoat installations. Cracks, previous patchwork, and weak sections are remediated, and non-bonding parts are removed to bare concrete when needed. After preparation, industrial vacuums are used to clear dust for a contaminant-free work surface. / The new resin layer, selected from epoxy, polyaspartic, or urethane, is installed to match the original system or upgraded as conditions demand. The finished floor undergoes a full visual and adhesion inspection before use, leaving Windsor properties with renewed, robust flooring built for everyday stress.

Detailed Floor Checks Precede Every Recoat in Windsor
George Tsinias checks adhesive strength, chemical resilience, and existing wear on every Windsor floor before recommending a recoat. Confirming real compatibility prevents further expense and avoids premature failures. Only qualified floors proceed to recoating, protecting the structure and investment for Windsor clients.

Advanced Mechanical Prep in Windsor for Lasting Bond
USA Epoxy Floors relies on diamond grinding or screening to establish the CSP needed for new resin attachment in Windsor. Thorough abrasion enables improved adhesion and bond strength, countering failures traced to shortcuts like acid etching or incomplete prep. The right surface ensures a longer-lasting, defect-resistant installation.

Resin System Selection Matched to Windsor Needs
Recoating in Windsor is based on the original system and design goals. George selects among epoxy, polyaspartic, and urethane, calibrating for use conditions and finish requirements. This results in floors that look refreshed and stand up to daily work or foot traffic throughout Hartford County.


get StARTED
Fill In your information below

who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Hartford County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓




ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Is Epoxy Floor Recoating available in Windsor?
Yes — Windsor and communities across Hartford County, CT. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
What should I expect during Epoxy Floor Recoating?
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Will Epoxy Floor Recoating work on a floor that already has a coating?
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
What system will be used for Epoxy Floor Recoating?
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Can Epoxy Floor Recoating be done in winter in Windsor?
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Windsor spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
How do I get a price for Epoxy Floor Recoating?
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Windsor, walks the floor, and quotes on the spot.

What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
.png)
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
.png)
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
.png)
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
.png)


get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Solid Color Epoxy Floor Installation
Solid color epoxy floor installation by USA Epoxy Floors delivers a single-tone, seamless finish using professional surface prep and multi-coat pigmented resin systems in Windsor. The result is a durable, uniform, chemical-resistant surface for residential, commercial, or industrial use in Windsor.
Floor Refinishing
Floor refinishing from USA Epoxy Floors in Windsor eliminates worn coatings, fixes slab damage, and produces a strong, well-profiled base. Mechanical grinding and repairs set the surface for any new system or functioning exposed concrete. Each result delivers a substrate ready for next-phase installation.

Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.




























