USA EPOXY FLOORS
Epoxy Coating in Hankins, NY
Epoxy coating by USA Epoxy Floors protects prepared concrete in Hankins using a seamless, layered resin system. Surfaces are mechanically profiled, repaired, and coated for resilience against impact and traffic. Hankins customers receive a functional finish for frequent use.
Why Choose Us
For epoxy coating projects in Hankins, USA Epoxy Floors begins by conducting a thorough site evaluation, including moisture measurement and identification of previous coatings or contaminants. Once these are established, diamond grinding or shot blasting is performed to achieve the right CSP texture for the chosen system. Any cracks, joints, or uneven areas in Hankins slabs are repaired before moving to the next phase. / During installation in Hankins, system components are mixed and applied: a primer coat if needed, followed by the resin base layer, with options for embedded flakes or quartz, finished with a protective topcoat. Equipment like professional-grade mixers, squeegees, and gauge rakes ensure an even finish. The recoat timing is managed carefully to prevent bonding issues between layers. / Final site review in Hankins checks for uniformity, bond soundness, and finished appearance. USA Epoxy Floors provides Hankins with flooring that meets routine and demanding use in garages, warehouses, and occupied residences—defending against abrasion, traffic, and spills.
Concrete Remediation and Coating Removal in Hankins
USA Epoxy Floors performs all crack filling, joint repair, and failed-coating removal in Hankins before any epoxy is installed. Old finishes and surface issues are eliminated so the new resin system bonds only to stable concrete, greatly increasing coating service life for Hankins spaces.
System Build Customization for Hankins Use Cases
USA Epoxy Floors chooses the type of epoxy coating system based on real Hankins conditions, such as forklift traffic, automotive use, wet service, or the need for a decorative sheen. Coatings are selected to function and last as dictated by the property and workflow in Hankins.
Surface and Moisture Validation for Hankins Projects
Each Hankins floor receives moisture analysis and tailored mechanical CSP profiling, handled directly by George Tsinias. This targeted prep addresses Hankins’s climate and site variables, allowing the epoxy system to adhere and cure as specified and preventing future failures like bubbling or delamination.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Sullivan County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Is Epoxy Coating available in Hankins?
Yes — Hankins and communities across Sullivan County, NY. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
What should I expect during Epoxy Coating?
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Will Epoxy Coating work on a floor that already has a coating?
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
What system will be used for Epoxy Coating?
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Can Epoxy Coating be done in winter in Hankins?
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Hankins spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
How do I get a price for Epoxy Coating?
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Hankins, walks the floor, and quotes on the spot.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Epoxy Floor Design
Epoxy floor design in Hankins by USA Epoxy Floors combines system specification, color selection, and finish detail planning for performance and appearance. George Tsinias evaluates the substrate and designs a plan that considers Hankins traffic and use patterns, producing a resilient and visually matched epoxy floor.
Concrete Floor Coating
USA Epoxy Floors applies Hankins concrete floor coatings in industrial, residential, and commercial settings. Every job begins with substrate testing and slab preparation, including grinding and defect repair. The completed system forms a tight, resinous surface engineered for Hankins operational needs.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
