USA EPOXY FLOORS
Concrete Floor Coating in Englewood, NJ
USA Epoxy Floors provides Englewood concrete floor coating for residential, commercial, and industrial properties. Projects are built on correct surface prep such as diamond grinding or shot blasting. The finished system delivers a durable, seamless floor designed for Englewood environments.
Why Choose Us
Concrete floor coating service in Englewood starts with an inspection of the slab. George Tsinias, owner of USA Epoxy Floors, checks for moisture, existing coatings, or cracks, and specifies preparation such as diamond grinding or shot blasting for the finish required by Englewood spaces. / Professional resinous installation follows: epoxy, polyaspartic, or urethane selected by use requirements, applied as a multi-layer build—primer, base, decorative elements if needed, and protective topcoat. This approach is proven on both commercial settings and residential garages throughout Bergen County. / After application, the floor is inspected with the property owner for cure, bond, and visual quality. The project closes with advice on usage and care, ensuring each Englewood property receives a high-performance and attractive new floor.
Preparation Matched to Englewood Concrete
In Englewood, concrete slabs show differences in age, surface quality, or prior repairs. USA Epoxy Floors identifies the proper surface preparation—diamond grinding or shot blasting—to deliver the ideal profile for the selected floor coating, setting up the system for long-term success.
Multi-Layer Resin Systems for Englewood Environments
Choosing between epoxy, polyaspartic, or urethane, USA Epoxy Floors builds each Englewood system to handle the area’s real demands. The multi-coat process, including base, pigment or decorative media, and protective topcoat, results in coating solutions proven in Bergen County commercial and residential properties.
Solving Coating Failures in Englewood
Peeling and delamination are common on floors in Englewood when surface prep is skipped or slab conditions are ignored. USA Epoxy Floors addresses the cause directly, removes problem coatings, and installs new coating systems over mechanically prepared concrete to stop failure from repeating.
get StARTED
Fill In your information below
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Bergen County property owners Choose Us
Licensed & Insured ⛨
25+ Years In Business ◷
100+ Satisfied Clients ✓
ABOUT
USA EPOXY FLOORS
Frequently Asked Questions
Do you offer Concrete Floor Coating in Englewood?
Yes. USA Epoxy Floors handles Concrete Floor Coating throughout Englewood and the surrounding Bergen County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
What is involved in Concrete Floor Coating?
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
How long does Concrete Floor Coating take in Englewood?
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Is my floor a candidate for Concrete Floor Coating?
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
What kind of preparation does the concrete need?
Mechanical profiling — diamond grinding or shot blasting — so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
How do I schedule Concrete Floor Coating in Englewood?
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Englewood, and is on site during the work.
What Our Clients Say about us..
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other Flooring Services
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor finishing
USA Epoxy Floors provides floor finishing in Englewood, beginning with in-depth substrate cleaning, repairing visible flaws, and applying a high-quality topcoat or sealer. This process renews and protects residential, commercial, and industrial spaces in Englewood with a consistent, tailored finish.
Floor Coating
Floor coating by USA Epoxy Floors means a resin system precisely profiled and bonded to concrete in Englewood. Every Englewood property receives custom assessment, surface preparation, and resin chemistry that ensures a finish built for regular cleaning, resistant to wear, and tuned for daily use.
Concrete Repair
USA Epoxy Floors performs concrete repair in Englewood for all types of slab flaws—cracks, joint splits, pits, and surface damage—across residential, industrial, and commercial properties. Each job starts with a technical site inspection and ends with mechanical prep and durable patching, leaving surfaces level and structurally sound.
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.
