What Our Clients Say about us..
USA EPOXY FLOORS
Airplane Hangar Epoxy Flooring in Harrington Park, NJ
USA Epoxy Floors provides flooring systems for airplane hangars in Harrington Park, Bergen County, addressing persistent issues like chemical spills, abrasion from aircraft traffic, and concrete deterioration. Our services include resurfacing main hangar floors, repairing slab imperfections, and applying high-strength epoxy or urethane coatings in maintenance, storage, and service areas. Each floor is constructed for aircraft load, resistance to hydraulic fluids and solvents, and ease of cleaning, helping hangars stay functional and safe.
What We Do With Airplane Hangar Floors
USA Epoxy Floors has provided airplane hangar flooring solutions in Harrington Park, NJ for facility managers, FBOs, and aviation operations teams, covering surface grinding, repair of cracks and expansion joints, coating removal, epoxy and urethane floor system installation, and durable protective finishes for over 25 years. Our work includes main hangar flooring, maintenance bays, storage rooms, aprons, and related utility areas, all requiring lasting strength and chemical resistance.
Airplane hangar floors are routinely exposed to rolling aircraft loads, aviation fluids such as fuel and skydrol, daily abrasion from landing gear, and frequent cleaning routines. Maintenance areas need protection against tool drops, oil stains, and harsh chemicals, while the primary hangar surface requires clarity for lighting, slip resistance for safety, and a finish that allows rapid detection of leaks or spills. Cleanability and the ability to survive frequent washing are also fundamental requirements of every aviation facility.
Our experience with installation, repair, and restoration in Harrington Park ensures mechanical preparation of each slab for optimal adhesion, including removal of weakened coatings and correction of surface flaws. Joints and cracks are stabilized, with moisture mitigation where needed. Epoxy or urethane systems are chosen for their compatibility with operational needs, and finishing options include pigmented or clear topcoats, optional slip-resistant textures, and chemical-resistant aggregates. Every floor is finished to meet real-world aviation demands, extend the lifespan of the facility, and create a hangar that is durable and straightforward to maintain.
get StARTED
Fill In your information below
ABOUT
USA EPOXY FLOORS
who we are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Why Bergen County property owners Choose Us
Licensed & Insured ⛨
20+ Years In Business ◷
100+ Satisfied Clients ✓
About Airplane Hangar Flooring in Harrington Park, NJ
USA Epoxy Floors has provided airplane hangar flooring services in Harrington Park, NJ, including surface preparation, epoxy installations, urethane coatings, concrete repair, and coating removal, for over 25 years. George Tsinias, owner of USA Epoxy Floors, brings his understanding of hangar flooring needs and aircraft facility requirements to each job. The company is locally owned, family-operated, and veteran-owned.
Frequently Asked Questions
Does USA Epoxy Floors work on Airplane Hangar properties near Harrington Park?
Yes. Airplane Hangar floor work runs throughout Harrington Park and Bergen County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels across the region for projects of this kind.
Is slip resistance addressed?
It is specified deliberately. Broadcast flake and quartz add texture, and anti-slip additives can go into the topcoat where the operation calls for it. The level is set against how the Airplane Hangar is actually used, including wet areas and wash-down zones.
What happens if the slab has moisture issues?
Moisture vapor rising through concrete lifts coatings that were not built for it — a frequent problem in older Airplane Hangar buildings. Slabs are tested where conditions warrant, and a moisture-mitigating primer or vapor barrier system is specified where readings call for it.
Can installation happen in cold weather?
Often. Polyaspartic and polyurea cure across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Airplane Hangar spaces around Harrington Park. Substrate temperature is checked before the job is scheduled.
How is the space prepared before work starts?
The floor area needs to be clear — equipment, stock, and vehicles moved out of the sections being coated. For a working Airplane Hangar, the sequence is planned so the disruption is contained to one area at a time wherever the layout allows.
Who runs the project?
Owner George Tsinias. He estimates, works the floor, and handles the final walkthrough on every job, running since 2001. Call or text (845) 464-2539 for a Airplane Hangar project in Harrington Park.
"4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!"
— Greg M.
.png)
"We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again."
— Gerry Brooks
"When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable."
— Steven Uva
"I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional—the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!"
— Christopher Hernandez
"USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend."
— A Rouhotas
get StARTED
Fill In your information below
Other property types
Select a Property TYPE to learn more
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.